Main Specifications | ||
Built-in Devices | H11DSi-NT | |
Dimensions (WxDxH) | Height 17.8″ (452mm) x Width 7″ (178mm) x Depth 25.5″ (647mm) | |
Form Factor | Tower / 4U Rackmountable – CSE-745BTS-R1K28BP2 | |
Type | A+ Server | |
Processor | ||
Cache | Up to 32 Cores | |
Compatible processor | Dual AMD EPYC 7000-series Processors | |
Compatible Socket | Socket SP3 | |
System Memory | ||
DIMM Sizes | 8GB, 16GB, 32GB, 64GB, 128GB | |
Error Detection | Corrects single-bit errors | |
Detects double-bit errors (using ECC memory) | ||
Memory Capacity | 16 DIMM sockets | |
Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs | ||
8-channel memory bus | ||
Memory Type | DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs | |
Memory Voltage | 1.2V | |
On-Board Devices | ||
Chipset | System on Chip (SoC) | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
ASPEED AST2500 BMC | ||
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
Network Controllers | 2 Intel X550 10GBase-T Ethernet Controllers | |
1 Realtek RTL8211E PHY (dedicated IPMI) | ||
SATA | SATA3 (6 Gbps) | |
VGA | ASPEED AST2500 BMC | |
Input / Output | ||
LAN | Dual 10G LAN ports | |
1 RJ45 Dedicated IPMI LAN port | ||
NVMe | 2 NVMe support with optional cables | |
Others | 1 COM port (rear) | |
2 SATA DOM power connector | ||
TPM 1.2 header | ||
SAS | 8 SAS3 ports support via optional Add-on Card | |
SATA | 10 SATA3 (6 Gbps) ports | |
USB | 2 USB 3.0 ports (rear) | |
2 USB 2.0 ports (rear) | ||
VGA | 1 VGA port | |
System BIOS | ||
BIOS Features | Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1 | |
BIOS Type | AMI 128Mb SPI Flash EEPROM | |
SAS / SATA Backplane | ||
SAS / SATA Backplane | Supports 8 SATA3 or 8 SAS3 HDD | |
Drive Bays | ||
Hot-swap | 8 hot-swap 3.5″ Drive Bays: 8 SATA3 by default or 8 SAS3 | |
Peripheral Drives | 3 peripheral 5.25″ drive bays | |
Front Panel | ||
Buttons | Power On/Off button, System Reset button | |
LEDs | Power LED, Hard drive activity LED, 2x Network activity LEDs, System Overheat LED / Fan fail LED / UID LED | |
Expansion / Connectivity | ||
Expansion Slots Total (Free) | 2 PCI-E x16 slots | |
3 PCI-E x8 slots | ||
M.2 | Interface: 1 SATA/PCI-E 3.0 x2 | |
Form factor: 2280, 22110 | ||
Key: M-key | ||
System Cooling | ||
Fans | 3 internal hot-swap 9400 RPM fans | |
2 external rear hot-swap 9400 RPM fans | ||
Power Supply | ||
Certification | 80PLUS Platinum Certified | |
Power Supply | 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | |
PC Health Monitoring | ||
CPU | Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT | |
CPU switching voltage regulator | ||
FAN | Up to 8-fan status tachometer monitoring | |
Up to eight 4-pin fan headers | ||
Status monitor for speed control | ||
Pulse Width Modulated (PWM) fan connectors | ||
LED | CPU / System Overheat LED | |
Other Features | Chassis Intrusion Detection | |
Chassis Intrusion Header | ||
Temperature | Monitoring for CPU and chassis environment | |
CPU Thermal Trip Support | ||
Thermal control for 8x Fan connectors | ||
I2C Temperature Sensing Logic | ||
Operating Environment / Compliance | ||
RoHS | RoHS Compliant | |
Environmental Parameters | ||
Operating Temperature | Operating Temperature: 10°C to 35°C (50°F to 95°F) | |
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) | ||
Operating Relative Humidity: 8% to 90% (non-condensing) | ||
Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Barebone, Cloud Computing, Data Center, Data Storage, Database, General Purpose, Hyperconverge Storage, Mainstream, Products, Rackmounts, Servers, Solutions, Web Hosting
A+ Server 4023S-TRT
- Dual AMD EPYC™ 7001/7002 Series Processors (AMD EPYC 7002 series drop-in support requires board revision 2.x)
- 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs (7001 Processors) 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required + 7002 Processors)
- Expansion slots: 2 PCI-E x16 slots – 3 PCI-E x8 slots – M.2 Interface: 1 SATA/PCI-E 3.0 x2 (Platform with EPYC 7002 processor only supports PCI-E type M.2 module) M.2 Form Factor: 2280, 22110 – M.2 Key: M-key
- Integrated IPMI 2.0 + KVM with dedicated LAN • Software Out of Band License key (SFT-OOB-LIC) included for OOB BIOS management
- Dual 10G LAN ports
- 8 hot-swap 3.5″ SATA3 drive bays; 3 peripheral 5.25″ drive bays; 1 M.2 NVMe SSD supported
- 1280W Redundant Power Supplies Platinum Level(Full redundancy based on configuration and application load)
Please Note: This is a barebone system only. It does NOT include processor, system RAM, storage drives, graphics cards and an operating system. Please Contact our sales team for a complete the system quote.
SKU: AS-4023S-TRT
Categories: Barebone, Cloud Computing, Data Center, Data Storage, Database, General Purpose, Hyperconverge Storage, Mainstream, Products, Rackmounts, Servers, Solutions, Web Hosting
Tags: 4U+ Servers, AMD, Tower
Weight | 69 lbs |
---|---|
Dimensions | 25.5 × 17.2 × 7 in |
Form Factor | 4U, Tower |
Chipset | SoC (System on Chip) |
CPU Family | AMD |
CPU Type | AMD EPYC 7001/7002 Series |
CPU Count | 2 CPU Sockets |
CPU Socket | SP3 |
TDP | 225W / cTDP up to 240W |
Drive Bays | 8 |
Drive Factor | 3.5" |
MAX Memory | 4TB |
Memory DIMM | 16 |
Network Controller | X550 |
Network | 2x 10GbE RJ45 |
Storage | NVMe (Optional), SAS (Optional), SATA (Native) |
Redundant PWS | YES |
Key Features
- Dual AMD EPYC™ 7001/7002 Series Processors (AMD EPYC 7002 series drop-in support requires board revision 2.x)
- 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs (7001 Processors) 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required + 7002 Processors)
- Expansion slots: 2 PCI-E x16 slots – 3 PCI-E x8 slots – M.2 Interface: 1 SATA/PCI-E 3.0 x2 (Platform with EPYC 7002 processor only supports PCI-E type M.2 module) M.2 Form Factor: 2280, 22110 – M.2 Key: M-key
- Integrated IPMI 2.0 + KVM with dedicated LAN • Software Out of Band License key (SFT-OOB-LIC) included for OOB BIOS management
- Dual 10G LAN ports
- 8 hot-swap 3.5″ SATA3 drive bays; 3 peripheral 5.25″ drive bays; 1 M.2 NVMe SSD supported
- 1280W Redundant Power Supplies Platinum Level(Full redundancy based on configuration and application load)
Warranty
Warranty: | 3 years Parts and labor Depot, 1 year parts advanced replacment |
Provider: | Manufacturer |
Phone No.: | 510-652-8283 |
E-mail: | [email protected] |
URL: | Click here for Manufacturer Website |
Coverage: | Parts replacement or repair |
Average Service Time: | 1-5 days Replacement |