, , , , , , , , , , , , ,

SYS-F629P3-RTBN

  • 4 Hot-plug System Nodes in 4U
    Each node supports:
  • Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
  • 12 DIMMs; up to 3TB 3DS ECC
    DDR4-2933MHz RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM
  • Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x16 (for SIOM )
  • SIOM Network card, 1 dedicated IPMI LAN port
  • 1 VGA, 2 USB 3.0 ports
  • 8 Hot-swap 3.5″ SAS3/SATA3 or 6 Hot-swap 3.5″ SAS3/SATA3 + 2 optional NVMe U.2 -M.2 Interface: PCI-E 3.0 x4 – M.2 Form Factor: 2260, 2280, 22110 – M.2 Key: M-Key
  • SAS3 via Broadcom 3108, HW RAID
  • 2x 8cm 14k RPM middle fans
  • 1200W Redundant Power Supplies Titanium Level (96% Efficiency)

Please Note: This is a barebone system only. It does NOT include processor, system RAM, storage drives, graphics cards and an operating system. Please Contact our sales team for a complete the system quote.

SKU: SYS-F629P3-RTBN Categories: , , , , , , , , , , , , , Tag:
Processor/Cache (per Node)
CPU
  • Dual Socket P (LGA 3647)
  • 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors,
    Dual UPI up to 10.4GT/s
  • Support CPU TDP 70-165W with IVR
Cores
  • Up to 28 Cores
Note BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R).

Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.
System Memory (per Node)
Memory Capacity
  • 12 DIMM slots
  • Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
  • Supports Intel® Optane™ DCPMM
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.
On-Board Devices
Chipset
  • Intel® C621 chipset
SAS
  • SAS3 (12Gbps) via Broadcom 3108
  • HW RAID
Network Controllers
  • Flexible networking via SIOM
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics
  • ASPEED AST2500 BMC
Input / Output (per node)
SAS
  • 8 SAS3 (12Gbps) ports
NVMe
  • 2 NVMe U.2 optional
LAN
  • SIOM flexible Network card
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 2 USB 3.0 ports (rear)
VGA
  • 1 VGA port
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
Management
Software
  • Intel® Node Manager
  • IPMI 2.0
  • KVM with dedicated LAN
  • SuperDoctor® 5
  • Watch Dog
Power Configurations
  • ACPI Power Management
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 4U Rackmount
Model
  • CSE-F424AS2-R1K23BP
Dimensions and Weight
Width
  • 17.63″ (448mm)
Height
  • 6.96″ (177mm)
Depth
  • 29″ (737mm)
Package
  • 28.3″ (W) x 15.0″ (H) x 42.4″ (D)
Weight
  • Net Weight: 150 lbs (68.04 kg)
  • Gross Weight: 200 lbs (90.71 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • Hard drive activity LED
  • Network activity LEDs
  • Information LED (UID, Fan failure, Overheat)
Expansion Slots (per node)
PCI-Express
  • 1 PCI-E 3.0 x16 (Low-profile)
  • 1 PCI-E 3.0 x16 (SIOM)
Drive Bays (per node)
Hot-swap
  • 8 Hot-swap 3.5″ SAS3/SATA3 or 6 Hot-swap 3.5″ SAS3/SATA3 + 2 optional NVMe U.2
M.2
  • M.2 Interface: PCI-E 3.0 x4
  • M.2 Form Factor: 2260, 2280, 22110
  • M.2 Key: M-Key
Backplane
1 SAS/SATA backplane
System Cooling (per node)
Fans
  • 2x 8cm 14 RPM middle fans
Power Supply (76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power
  • 1000W/1200W
Dimension
(W x H x L)
  • 76 x 40 x 336 mm
Input
  • 100-127Vac / 15-12A / 50-60Hz
  • 200-240Vac / 8.5-7A / 50-60Hz
  • 200-240Vdc / 8.5-7A (for CCC only)
+12V
  • Max: 83A / Min: 0A (100-127Vac)
  • Max: 100A / Min: 0A (200-240Vac)
  • Max: 100A / Min: 0A (200-240Vdc)
+5Vsb
  • Max: 4A / Min: 0A
Output Type
  • 19 Pairs Gold Finger Connector
Certification Platinum Level Certified95%+Titanium Level
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
Weight 200 lbs
Dimensions 29 × 17.63 × 6.96 in
Form Factor

4U
Chipset

Intel C621
CPU Family

INTEL
CPU Type

Cascade Lake/Skylake, Xeon Scalable Processors
CPU Count

2 CPU Sockets
CPU Socket

LGA-3647
Nodes per Enclosure

4x Nodes
TDP

70-165W
Drive Bays

8
Drive Factor

3.5"
MAX Memory

3TB
Memory DIMM

12
Network Controller

SIOM
Network

SIOM
Storage

NVMe (Native), SATA (Native)
Redundant PWS

YES

Key Features

  • 4 Hot-plug System Nodes in 4U
    Each node supports:
  • Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
  • 12 DIMMs; up to 3TB 3DS ECC
    DDR4-2933MHz RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM
  • Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x16 (for SIOM )
  • SIOM Network card, 1 dedicated IPMI LAN port
  • 1 VGA, 2 USB 3.0 ports
  • 8 Hot-swap 3.5″ SAS3/SATA3 or 6 Hot-swap 3.5″ SAS3/SATA3 + 2 optional NVMe U.2 -M.2 Interface: PCI-E 3.0 x4 – M.2 Form Factor: 2260, 2280, 22110 – M.2 Key: M-Key
  • SAS3 via Broadcom 3108, HW RAID
  • 2x 8cm 14k RPM middle fans
  • 1200W Redundant Power Supplies Titanium Level (96% Efficiency)

Please Note: This is a barebone system only. It does NOT include processor, system RAM, storage drives, graphics cards and an operating system. Please Contact our sales team for a complete the system quote.

Warranty

Warranty: 3 years Parts and labor Depot, 1 year parts advanced replacment
Provider: Manufacturer
Phone No.: 510-652-8283
E-mail: [email protected]
URL: Click here for Manufacturer Website
Coverage: Parts replacement or repair
Average Service Time: 1-5 days Replacement

Related products