, , , , , , , , , ,

SYS-6029P-WTRT

Starting at $1,727.99

  • Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
  • 12 DIMMs; up to 3TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM
  • 1 PCI-E 3.0 x16 (FHHL) slots, 2 PCI-E 3.0 x8 (FHHL) slots, 2 PCI-E 3.0 x8 (LP) slots, 1 PCI-E 3.0 x16 for Add-on-Module (Support SAS3 Storage controller), 1 PCI-E 3.0 x4 NVMe M.2 slot
  • 12 Hot-swap 3.5″ SAS/SATA drive bays (4 NVMe/SAS3/SATA3 hybrid drive bays)
  • 2x 10GBase-T ports via Intel C622
  • 1 VGA, 4 USB 3.0 (rear)
  • 1200W Redundant Power Supplies Titanium Level (96% Efficiency)

Please Note: This is a barebone system only. It does NOT include processor, system RAM, storage drives, graphics cards and an operating system. Please Contact our sales team for a complete the system quote.

Processor/Cache
CPU
  • Dual Socket P (LGA 3647)
  • 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors,
    Dual UPI up to 10.4GT/s
  • Support CPU TDP 70-205W
Cores
  • Up to 28 Cores
Note BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)
System Memory
Memory Capacity
  • 12 DIMM slots
  • Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
  • Supports Intel® Optane™ DCPMM
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.
On-Board Devices
Chipset
  • Intel® C622 chipset
SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Controllers
  • Dual 10Gbase-T LAN with Intel C622
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
  • ASPEED AST2500 BMC
Input / Output
SATA
  • 12 SATA3 (6 Gbps) ports
LAN
  • 2 RJ45 10GBase-T ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 4 USB 3.0 ports (rear)
Video
  • 1 VGA port
DOM
  • 2 SuperDOM (Disk on Module) ports
System BIOS
BIOS Type
  • AMI 32Mb SPI Flash ROM
Management
Software
  • Intel® Node Manager
  • IPMI 2.0
  • KVM with dedicated LAN
  • SSM, SPM, SUM
  • SuperDoctor® 5
  • Watch Dog
Power Configurations
  • ACPI / APM Power Management
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 2U Rackmount
Model
  • CSE-826BAC4-R1K23WB
Dimensions and Weight
Width
  • 17.2″ (437mm)
Height
  • 3.5″ (89mm)
Depth
  • 25.5″ (648mm)
Gross Weight
  • 64 lbs (29.0 kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • Network activity LEDs
  • Universal Information (UID) LED
Expansion Slots
PCI-Express
    • 1 PCI-E 3.0 x16 (FHHL) slot
    • 2 PCI-E 3.0 x8 (FHHL) slots
    • 2 PCI-E 3.0 x8 (LP) slots
    • 1 PCI-E 3.0 x16 for Add-on-Module (AOM)
    • 1 PCI-E 3.0 x4 NVMe M.2 slot

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Drive Bays
Hot-swap
  • 12 Hot-swap 3.5″ SAS/SATA drive bays with SES2 and Mini-i-Pass (SFF 8087) connectivity
Backplane
SAS/SATA HDD Backplane
System Cooling
Fans
  • 3 High-performance 8cm PWM fans
Power Supply (76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power
  • 1000W/1200W
Dimension
(W x H x L)
  • 76 x 40 x 336 mm
Input
  • 100-127Vac / 15-12A / 50-60Hz
  • 200-240Vac / 8.5-7A / 50-60Hz
  • 200-240Vdc / 8.5-7A (for CCC only)
+12V
  • Max: 83A / Min: 0A (100-127Vac)
  • Max: 100A / Min: 0A (200-240Vac)
  • Max: 100A / Min: 0A (200-240Vdc)
+5Vsb
  • Max: 4A / Min: 0A
Output Type
  • 19 Pairs Gold Finger Connector
Certification Platinum Level Certified95%+Titanium Level
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
Weight 64 lbs
Dimensions 3.5 × 17.2 × 25.5 in
Form Factor

2U

Chipset

Intel C622

CPU Family

INTEL

CPU Type

2nd Gen Intel® Xeon® Scalable processor (Cascade Lake/Skylake)

CPU Count

2 CPU Sockets

CPU Socket

LGA-3647

TDP

70-205W

Drive Bays

12

Drive Factor

3.5"

MAX Memory

3TB

Memory DIMM

12

Network Controller

C622

Network

2x 10GbE RJ45

Storage

NVMe (Optional), SAS (Optional), SATA (Native)

Redundant PWS

YES

Key Features

  • Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
  • 12 DIMMs; up to 3TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM
  • 1 PCI-E 3.0 x16 (FHHL) slots, 2 PCI-E 3.0 x8 (FHHL) slots, 2 PCI-E 3.0 x8 (LP) slots, 1 PCI-E 3.0 x16 for Add-on-Module (Support SAS3 Storage controller), 1 PCI-E 3.0 x4 NVMe M.2 slot
  • 12 Hot-swap 3.5″ SAS/SATA drive bays (4 NVMe/SAS3/SATA3 hybrid drive bays)
  • 2x 10GBase-T ports via Intel C622
  • 1 VGA, 4 USB 3.0 (rear)
  • 1200W Redundant Power Supplies Titanium Level (96% Efficiency)

Please Note: This is a barebone system only. It does NOT include processor, system RAM, storage drives, graphics cards and an operating system. Please Contact our sales team for a complete the system quote.

Warranty

Warranty: 3 years Parts and labor Depot, 1 year parts advanced replacment
Provider: Manufacturer
Phone No.: 510-652-8283
E-mail: [email protected]
URL: Click here for Manufacturer Website
Coverage: Parts replacement or repair
Average Service Time: 1-5 days Replacement