SYS-6029BT-HNC0R

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
24 DIMMs; up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM
2 PCI-E 3.0 x16 (LP) slot; 1 SIOM card support (flexible networking) Note: must bundle with Network card
3 Hot-swap 3.5″ NVMe/SAS3 drive bays; 2 M.2 SATA3 or NVMe support
SAS3 support via Broadcom 3008; IT mode
1 Carrier Card slot (M.2 support)
IPMI 2.0 + KVM with dedicated LAN
Video via Aspeed AST2500 BMC
4 Heavy duty 8cm PWM fans with air shroud
2200W Redundant Power Supplies Titanium Level (96%)

Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system.

Processor/Cache

CPU	Dual Socket P (LGA 3647) 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors, Dual UPI up to 10.4GT/s Support CPU TDP 70-205W*
Cores	Up to 28 Cores
Note	* Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization.
Note	BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R)


System Memory

Memory Capacity	24 DIMM slots Up to 6TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM Supports Intel® Optane™ DCPMM
Memory Type	2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note	2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro Cascade Lake only. Contact your Supermicro sales rep for more info.


On-Board Devices

Chipset	Intel® C621 chipset
SAS	SAS3 (12Gbps) via Broadcom 3008; IT mode
Network	Must bundle with at least one SIOM network card
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video	ASPEED AST2500 BMC


Input / Output (per Node)

LAN	1 RJ45 Dedicated IPMI LAN port
USB	2 USB 3.0 ports (rear)
Video	1 VGA port
DOM	1 SuperDOM (Disk on Module) port
Others	M.2 and SATA DOM for boot drive only


Management

Software	Intel® Node Manager IPMI 2.0 KVM with dedicated LAN SSM, SPM, SUM SuperDoctor® 5 Watch Dog
Power Configurations	ACPI / APM Power Management


PC Health Monitoring

CPU	Monitors for CPU Cores, Chipset Voltages, Memory. 4+1 Phase-switching voltage regulator
FAN	Fans with tachometer monitoring Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment Thermal Control for fan connectors


Dimensions and Weight

Width	17.6″ (447mm)
Height	3.47″ (88mm)
Depth	30.11″ (765mm)
Package	9.76″ (H) x 24.65″ (W) x 45.28″ (D)
Weight	Gross Weight: 86.5 lbs (39.24 kg) Net Weight: 56 lbs (25.4 kg)
Available Colors	Black


Front Panel

Buttons	Power On/Off button UID button
LEDs	Power status LED HDD activity LED Network activity LEDs Universal Information (UID) LED


Expansion Slots (per Node)

PCI-Express	2 PCI-E 3.0 (x16) Low-profile slots 1 SIOM card support (must bundle with network card)


Drive Bays / Storage (per Node)

Hot-swap	3 Hot-swap 3.5″ NVMe/SAS3 drive bays Please contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD.
M.2	2 M.2 NVMe or SATA (2240/2260/2280) via optional AOC-SMG3-2H8M2-B


System Cooling

Fans	4 Heavy duty 8cm PWM fans with air shroud


Power Supply
2200W Redundant Power Supplies with PMBus
Total Output Power	1200W/1800W/1980W/2090/2200W
Dimension (W x H x L)	45 x 40 x 480 mm
Input	1200W: 100-127Vac / 50-60Hz 1800W: 200-220Vac / 50-60Hz 1980W: 220-230Vac / 50-60Hz 2090W: 230-240Vac / 50-60Hz 2090W: 180-220Vac (for UL/cUL only) 2200W: 220-240Vac (for UL/cUL only) 2090W: 230-240Vdc (for CCC only)
+12V	Max: 100A / Min: 0A (100-127Vac) Max: 150A / Min: 0A (200-220Vac) Max: 165A / Min: 0A (220-230Vac) Max: 174.17A / Min: 0A (230-240Vac) Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) Max: 174.17A / Min: 0A (230-240Vdc, CCC only)
12Vsb	Max: 2.1A / Min: 0A
Output Type	Gold Finger
Certification	Titanium Level


Operating Environment

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Weight	56 lbs
Dimensions	30.11 × 17.6 × 3.47 in
Form Factor	2U
Chipset	Intel C621
CPU Family	INTEL
CPU Type	Cascade Lake/Skylake, Xeon Scalable Processors
CPU Count	2 CPU Sockets
CPU Socket	LGA-3647
Nodes per Enclosure	4x Nodes
TDP	70-205W
Drive Bays	3
Drive Factor	3.5"
MAX Memory	6TB
Memory DIMM	24
Network Controller	SIOM
Network	SIOM
Storage	NVMe (Native), SAS (Native)
Redundant PWS	YES

Key Features

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
24 DIMMs; up to 6TB 3DS ECC DDR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM
2 PCI-E 3.0 x16 (LP) slot; 1 SIOM card support (flexible networking) Note: must bundle with Network card
3 Hot-swap 3.5″ NVMe/SAS3 drive bays; 2 M.2 SATA3 or NVMe support
SAS3 support via Broadcom 3008; IT mode
1 Carrier Card slot (M.2 support)
IPMI 2.0 + KVM with dedicated LAN
Video via Aspeed AST2500 BMC
4 Heavy duty 8cm PWM fans with air shroud
2200W Redundant Power Supplies Titanium Level (96%)

Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system.

Warranty:	3 years Parts and labor Depot, 1 year parts advanced replacment
Provider:	Manufacturer
Phone No.:	510-652-8283
E-mail:	[email protected]
URL:	Click here for Manufacturer Website
Coverage:	Parts replacement or repair
Average Service Time:	1-5 days Replacement