, , , , , , , , , , ,

SYS-6019P-WTR

  • Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
  • 12 DIMMs; up to 3TB 3DS ECC DR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM
  • 2 PCI-E 3.0 x16 (FHHL) slots, 1 PCI-E 3.0 x8 (LP) slot, 1 PCI-E 3.0 x16 for Add-on-Module (Support SAS3 Storage controller), 1 PCI-E 3.0 x4 NVMe M.2 slot
  • 4 Hot-swap 3.5″ SAS3/SATA3 drive bays
  • 2 1GbE LAN ports via Intel C621
  • 1 VGA, 4 USB 3.0 (rear)
  • 750W Redundant Power Supplies Platinum Level High-efficiency

Please Note: This is a barebone system only. It does NOT include processor, system RAM, storage drives, graphics cards and an operating system. Please Contact our sales team for a complete the system quote.

Processor/Cache
CPU
  • Dual Socket P (LGA 3647)
  • 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors,
    Dual UPI up to 10.4GT/s
  • Support CPU TDP 70-165W*
Cores
  • Up to 28 Cores
Note * Certain high frequency optimized CPUs within 165W TDP are not supported, such as Intel Gold 6144, 6146, 6244 and 6246.
Note  BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R).

Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information.

System Memory
Memory Capacity
  • 12 DIMM slots
  • Up to 3TB 3DS ECC DDR4-2933MHz RDIMM/LRDIMM
  • Supports Intel® Optane™ DCPMM
Memory Type
  • 2933/2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM
Note  2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
Cascade Lake only. Contact your Supermicro sales rep for more info.
On-Board Devices
Chipset
  • Intel® C621 chipset
SATA
  • SATA3 (6Gbps); RAID 0, 1, 5, 10
Network Controllers
  • Dual LAN with Gigabit Ethernet from C621
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video
  • ASPEED AST2500 BMC
Input / Output
SATA
  • 4 SATA3 (6 Gbps) ports
LAN
  • 2 RJ45 Gigabit Ethernet ports
  • 1 RJ45 Dedicated IPMI LAN port
USB
  • 4 USB 3.0 ports (rear)
Video
  • 1 VGA port
DOM
  • 2 SuperDOM (Disk on Module) ports
System BIOS
BIOS Type
  • AMI 32Mb SPI Flash ROM
Management
Software
  • Intel® Node Manager
  • IPMI 2.0
  • KVM with dedicated LAN
  • SSM, SPM, SUM
  • SuperDoctor® 5
  • Watch Dog
Power Configurations
  • ACPI / APM Power Management
PC Health Monitoring
CPU
  • Monitors for CPU Cores, Chipset Voltages, Memory.
  • 4+1 Phase-switching voltage regulator
FAN
  • Fans with tachometer monitoring
  • Status monitor for speed control
  • Pulse Width Modulated (PWM) fan connectors
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for fan connectors
Chassis
Form Factor
  • 1U Rackmount
Model
  • CSE-815TQC-R706WB2
Dimensions and Weight
Width
  • 17.2″ (437mm)
Height
  • 1.7″ (43mm)
Depth
  • 25.6″ (650mm)
Gross Weight
  • 46 lbs (20.9kg)
Available Colors
  • Black
Front Panel
Buttons
  • Power On/Off button
  • UID button
LEDs
  • Power status LED
  • HDD activity LED
  • Network activity LEDs
  • Universal Information (UID) LED
Expansion Slots
PCI-Express
    • 2 PCI-E 3.0 x16 (FHHL) slots
    • 1 PCI-E 3.0 x8 (LP) slot
    • 1 PCI-E 3.0 x16 for Add-on-Module (AOM)
    • 1 PCI-E 3.0 x4 NVMe M.2 slot

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Drive Bays
Hot-swap
  • 4 Hot-swap 3.5″ SATA3 drive bays
Backplane
SAS/SATA HDD Backplane
System Cooling
Fans
  • 4 Counter-rotating 4cm PWM fans
AC/DC240V Input Redundant Power Supply
700W/750W Redundant Power Supplies with PMBus
Total Output Power
  • 700W/750W
Dimension
(W x H x L)
  • 54.5 x 40.25 x 320 mm
Input
  • 100 – 140Vac / 8 – 6A / 50-60Hz
  • 200 – 240Vac / 4.5 – 3.8A / 50-60Hz
  • 200 – 240Vdc / 4.5 – 3.8A (CCC Only)
+12V
  • Max: 58A / Min: 0.5A (100 – 140Vac)
  • Max: 62A / Min: 0.5A (200 – 240Vac)
  • Max: 62A / Min: 0.5A (200 – 240Vdc)
    (CB/CCC Only)
+5V sb
  • Max: 3A / Min: 0A
Output Type
  • Gold Finger Connector Mating with Molex 45984-4343
Certification Platinum Level Certified
Platinum Certified
Operating Environment
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C ~ 35°C (50°F ~ 95°F)
  • Non-operating Temperature:
    -40°C to 60°C (-40°F to 140°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
Weight 46 lbs
Dimensions 1.7 × 17.2 × 25.6 in
Form Factor

1U

Chipset

Intel C621

CPU Family

INTEL

CPU Type

2nd Gen Intel® Xeon® Scalable processor (Cascade Lake/Skylake)

CPU Count

2 CPU Sockets

CPU Socket

LGA-3647

TDP

70-165W

Drive Bays

4

Drive Factor

3.5"

MAX Memory

3TB

Memory DIMM

12

Network Controller

C621

Network

2x 1GbE RJ45

Storage

SAS (Optional), SATA (Native)

Redundant PWS

YES

Key Features

  • Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake)
  • 12 DIMMs; up to 3TB 3DS ECC DR4-2933MHz† RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM
  • 2 PCI-E 3.0 x16 (FHHL) slots, 1 PCI-E 3.0 x8 (LP) slot, 1 PCI-E 3.0 x16 for Add-on-Module (Support SAS3 Storage controller), 1 PCI-E 3.0 x4 NVMe M.2 slot
  • 4 Hot-swap 3.5″ SAS3/SATA3 drive bays
  • 2 1GbE LAN ports via Intel C621
  • 1 VGA, 4 USB 3.0 (rear)
  • 750W Redundant Power Supplies Platinum Level High-efficiency

Please Note: This is a barebone system only. It does NOT include processor, system RAM, storage drives, graphics cards and an operating system. Please Contact our sales team for a complete the system quote.

Warranty

Warranty: 3 years Parts and labor Depot, 1 year parts advanced replacment
Provider: Manufacturer
Phone No.: 510-652-8283
E-mail: [email protected]
URL: Click here for Manufacturer Website
Coverage: Parts replacement or repair
Average Service Time: 1-5 days Replacement