, , , , , , , , , ,

SYS-5039MS-H8TRF

Starting at $4,493.99

  • Single socket H4 (LGA 1151) supports Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen. Core™ i3 series, Intel® Celeron® and Intel® Pentium®
  • 2x 3.5″ SATA3 by default; 2x 2.5″ SATA3 HDDs w/ Optional kits
  • Up to 64GB ECC UDIMM DDR4-2400MHz in 4 sockets
  • 2 GbE LAN ports via Intel i350, 1 dedicated IPMI LAN port
  • 1 PCI-E 3.0 x8 and 1 Micro-LP
  • 2 USB 2.0, 1 VGA, 1 COM port, (with KVM dongle)
  • 1 USB 3.0 (Type A), 1 SATA DOM
  • 4 heavy duty hot-swap 8cm fans with optimal cooling zone (per system)
  • 1600W Redundant power supplies Titanium Level Certified (per system)

Please Note: This is a barebone system only. It does NOT include processor, system RAM, storage drives, graphics cards and an operating system. Please Contact our sales team for a complete the system quote.

Processor/Cache
CPU
  • Single Socket H4 (LGA 1151) supports:
  • Intel® Xeon® processor E3-1200 v6/v5,
    Intel® 7th/6th Gen Core™ i3,
    Intel® Pentium®,
    Intel® Celeron® processors
  • CPU TDP up to 80W
Note BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ Processors
System Memory (per node)
Memory Capacity
  • 4x 288-pin DDR4 DIMM slots
  • Supports up to 64 GB DDR4 ECC Un-Buffered memory (UDIMM)
Memory Type
  • 2400MHz/2133MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated UDIMMs
DIMM Sizes
  • 16GB, 8GB, 4GB
Memory Voltage
  • 1.2 V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
Expansion Slots (per node)
PCI-Express
  • 1 PCI-E 3.0 x8 Low-profile slot
  • 1 Micro-LP for Dual GbE (pre-installed); 10GbE or IB AOC optional
Network Devices (per node)
Micro-LP NIC
  • Intel® i350 GbE controller
  • Dual RJ-45 connectors
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/O Acceleration Technology (I/O AT)
  • MicroLP Adapter Matrix (Networking options)
On-Board Devices (per node)
Chipset
  • Intel® C236 chipset
SATA
  • SATA3 (6Gbps) via C236 controller
IPMI
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM over LAN support
  • ASPEED AST2400 BMC
Headers
  • 1x Type A USB 3.0
Graphics
  • ASPEED AST2400 Graphics (BMC with Graphic controller)
Input / Output (per node)
SATA
  • 2 SATA3 (6Gbps) ports
LAN
  • 2 RJ45 Gigabit Ethernet LAN ports
  • 1 RJ45 Dedicated IPMI LAN port
DOM
  • SATA DOM (Disk on Module) power connector support
KVM
  • 1 VGA, 1 COM and 2 USB 2.0 (with KVM dongle)
System BIOS
BIOS Type
  • 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
  • DMI 2.3
  • ACPI 1.0 / 2.0
  • USB Keyboard support
  • SMBIOS 2.3
Rear Window (each node)
Switch
  • Power / UID
Chassis
Form Factor
  • 3U
Model
  • CSE-938BH-R1K68B
Dimensions and Weight
Height
  • 5.21″ (132.5 mm)
Width
  • 17.26″ (438.4 mm)
Depth
  • 23.2″ (589 mm)
Package
  • 11.65″ (H) x 26.26″ (W) x 34″ (D)
Weight
  • Net Weight: 62.2 lbs (28.21 kg)
  • Gross Weight: 88 lbs (39.92 kg)
Color
  • Black
Front Panel
Buttons
  • Power On/Off button
LEDs
  • Power LED
  • Node status LED
Drive Bays (per node)
Internal
  • 2 Hot-swap 3.5″ SATA3 (6Gbps) HDDs per node (or 2x 2.5″ SATA3 with optional kits); up to 16 HDDs total
  • Enterprise SATA HDD only recommended
System Cooling
Fans
  • 4 Heavy duty 8cm fans with optimal cooling zone
Power Supply (76mm Width)
1600W 1U Redundant Power Supplies with PMBus
Total Output Power
  • 800W: 100 – 140Vac
  • 1600W: 180 – 240Vac
Dimension
(W x H x L)
  • 76 x 40.4 x 336 mm
Input
  • 100-140Vac / 10-7A / 50-60Hz
  • 180-240Vac / 11-8A / 50-60Hz
+12V
  • Max: 67A / Min: 0A (100-140Vac)
  • Max: 133A / Min: 0A (180-240Vac)
+5Vsb
  • Max: 1A / Min: 0A
Output Type
  • 27 Pairs Gold Finger Connector
Certification Titanium Level Certified96%  Titanium Level
PC Health Monitoring
CPU
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
  • 3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V
FAN
  • Cooling zone
Temperature
  • Monitoring for CPU and chassis environment
Operating Environment / Compliance
RoHS
  • RoHS Compliant
Environmental Spec.
  • Operating Temperature:
    10°C to 35°C (50°F to 95°F)
  • Non-operating Temperature:
    -40°C to 70°C (-40°F to 158°F)
  • Operating Relative Humidity:
    8% to 90% (non-condensing)
  • Non-operating Relative Humidity:
    5% to 95% (non-condensing)
Weight 88 lbs
Dimensions 23.2 × 17.26 × 5.21 in
Form Factor

3U

Nodes per Enclosure

8x Nodes

Chipset

Intel C236

CPU Family

INTEL

CPU Socket

LGA-1151

CPU Type

Intel Xeon processor E3-1200 v6/v5, Intel 7th/6th Gen. Core i3 series, Intel® Celeron®, Intel® Pentium®

CPU Count

1 CPU Sockets

TDP

80W

Drive Bays

2

Drive Factor

2.5", 3.5"

MAX Memory

64GB

Memory DIMM

4

Network Controller

i350

Network

2x 1GbE RJ45

Storage

SAS (Optional), SATA (Native)

Redundant PWS

YES

Key Features

  • Single socket H4 (LGA 1151) supports Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen. Core™ i3 series, Intel® Celeron® and Intel® Pentium®
  • 2x 3.5″ SATA3 by default; 2x 2.5″ SATA3 HDDs w/ Optional kits
  • Up to 64GB ECC UDIMM DDR4-2400MHz in 4 sockets
  • 2 GbE LAN ports via Intel i350, 1 dedicated IPMI LAN port
  • 1 PCI-E 3.0 x8 and 1 Micro-LP
  • 2 USB 2.0, 1 VGA, 1 COM port, (with KVM dongle)
  • 1 USB 3.0 (Type A), 1 SATA DOM
  • 4 heavy duty hot-swap 8cm fans with optimal cooling zone (per system)
  • 1600W Redundant power supplies Titanium Level Certified (per system)

Please Note: This is a barebone system only. It does NOT include processor, system RAM, storage drives, graphics cards and an operating system. Please Contact our sales team for a complete the system quote.

Warranty

Warranty: 3 years Parts and labor Depot, 1 year parts advanced replacment
Provider: Manufacturer
Phone No.: 510-652-8283
E-mail: [email protected]
URL: Click here for Manufacturer Website
Coverage: Parts replacement or repair
Average Service Time: 1-5 days Replacement