Main Specifications | ||
Built-in Devices | Super X10DRX | |
Device Type | SuperServer | |
Dimensions (WxDxH) | Width 17.2″ (437mm) x Height 3.5″ (89mm) x Depth 27.76″ (705.3mm) | |
Enclosure Color | Black | |
Form Factor | 2U Rackmount – CSE-213XAC-R1K05LP | |
Weight | Net Weight: 36 lbs (16.4 kg) – Gross Weight: 72 lbs (32.7 kg) | |
Processor | ||
Cache | Up to 22 Cores / Up to 55MB† Cache | |
Compatible processor | Intel Xeon processor E5-2600 v4/v3 family (up to 145W TDP) | |
QPI | QPI up to 9.6 GT/s | |
Compatible Socket | Dual Socket R3 (LGA 2011) | |
System Memory | ||
Error Detection | Corrects single-bit errors | |
Memory Voltage | 1.2 V | |
DIMM Sizes | RDIMM: 32GB, 16GB, 8GB, 4GB | |
LRDIMM: 64GB, 32GB | ||
3DS LRDIMM: 128GB | ||
Memory Capacity | 16x 288-pin DDR4 DIMM slots | |
Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM | ||
Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit | |
Input / Output | ||
DOM | 2 SuperDOM (Disk on Module) ports | |
Others | 1 TPM 1.2 20-pin Header | |
SATA | 8 SATA3 (6Gbps) ports | |
Front Panel | ||
Buttons | Power On/Off button, System Reset button | |
LEDs | Power status LED, Hard drive activity LED, 2 Network activity LEDs, System information (overheat/UID) LED, Power fail LED | |
Expansion / Connectivity | ||
Expansion Slots Total (Free) | 10 PCI-E 3.0 x8 slots | |
1 PCI-E 2.0 x4 (in x8) slot | ||
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.) | ||
Peripheral Bay | ||
Optional | 1x slim DVD-ROM drive (optional) | |
Peripheral | 1x 5.25″ peripheral drive bay | |
Input / Output | ||
LAN | 2 RJ45 Gigabit Ethernet LAN ports | |
1 RJ45 Dedicated IPMI LAN port | ||
Serial Port / Header | 1 COM port (rear) | |
USB | 2 USB 3.0 ports (rear) | |
2 USB 2.0 ports (rear) | ||
VGA | 1 VGA port | |
On-Board Devices | ||
Chipset | Intel® C612 chipset | |
Graphics | ASPEED AST2400 BMC | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
ASPEED AST2400 BMC | ||
Network Controllers | Intel® i350 Dual Port Gigabit Ethernet | |
Virtual Machine Device Queues reduce I/O overhead | ||
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | ||
1x Realtek RTL8201N PHY (dedicated IPMI) | ||
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 | |
Drive Bays | ||
Hot-swap | 16 Hot-swap 2.5″ drive bays | |
8 SATA3 ports by default | ||
Optional drive support: 16 SAS3 | ||
Note: optional storage card is required to support more than 10 drives | ||
System Cooling | ||
Fans | 4x 8cm 7K RPM, Middle fans | |
SAS / SATA Backplane | ||
SAS / SATA Backplane | 1x SAS3 / SATA backplane | |
Power Supply | ||
Certification | Titanium Level | |
Power Supply | 1000W Redundant Power Supplies with PMBus | |
System BIOS | ||
BIOS Features | Plug and Play (PnP), PCI 2.3, ACPI 1.0 / 2.0 / 3.0 / 4.0, BIOS rescue hot keys, USB Keyboard support, SMBIOS 2.7.1, UEFI 2.3.1 | |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | |
Operating Environment / Compliance | ||
Operating Temperature | Operating Temperature: 10°C to 35°C (50°F to 95°F) | |
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) | ||
Operating Relative Humidity: 8% to 90% (non-condensing) | ||
Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
RoHS Compliant |
AI / Deep Learning, Barebone, IOPS Intensive, Max IO Systems, Products, Rackmounts, Servers, Solutions
SYS-2028R-TXR
Starting at $1,663.99
- Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
- Up to 2TB ECC 3DS LRDIMM , up to DDR4- 2400MHz ; 16x DIMM slots
- 10 PCI-E 3.0 x8 Low-profile slots, 1 PCI-E 2.0 x4 (in x8) Low-profile slot
- Intel® i350 Dual port Gigabit Ethernet
- 16 Hot-swap 2.5″ drive bays, 8 SATA3 ports by default; optional drive support: 16 SAS3; 1x 5.25″ peripheral drive bay
- I/O: 1 COM, 1 VGA, 2 USB 3.0 and 2 USB 2.0 (rear)
- Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
- 4x 8cm 7K RPM, middle fans
- 1000W Redundant Power Supplies Titanium Level (96%)
Please Note: This is a barebone system only. It does NOT include processor, system RAM, storage drives, graphics cards and an operating system. Please Contact our sales team for a complete the system quote.
SKU: SYS-2028R-TXR
Categories: AI / Deep Learning, Barebone, IOPS Intensive, Max IO Systems, Products, Rackmounts, Servers, Solutions
Tag: 2U Servers
Weight | 72 lbs |
---|---|
Dimensions | 27.76 × 17.2 × 3.5 in |
Form Factor | 2U |
Chipset | Intel C612 |
CPU Family | INTEL |
CPU Type | Intel Xeon processor E5-2600 v4/v3 family |
CPU Count | 2 CPU Sockets |
CPU Socket | LGA-2011 |
TDP | 145W |
Drive Bays | 16 |
Drive Factor | 2.5" |
MAX Memory | 2TB |
Memory DIMM | 16 |
Network Controller | i350 |
Network | 2x 1GbE RJ45 |
Storage | SATA (Native) |
Redundant PWS | YES |
Key Features
- Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
- Up to 2TB ECC 3DS LRDIMM , up to DDR4- 2400MHz ; 16x DIMM slots
- 10 PCI-E 3.0 x8 Low-profile slots, 1 PCI-E 2.0 x4 (in x8) Low-profile slot
- Intel® i350 Dual port Gigabit Ethernet
- 16 Hot-swap 2.5″ drive bays, 8 SATA3 ports by default; optional drive support: 16 SAS3; 1x 5.25″ peripheral drive bay
- I/O: 1 COM, 1 VGA, 2 USB 3.0 and 2 USB 2.0 (rear)
- Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
- 4x 8cm 7K RPM, middle fans
- 1000W Redundant Power Supplies Titanium Level (96%)
Warranty
Warranty: | 3 years Parts and labor Depot, 1 year parts advanced replacment |
Provider: | Manufacturer |
Phone No.: | 510-652-8283 |
E-mail: | [email protected] |
URL: | Click here for Manufacturer Website |
Coverage: | Parts replacement or repair |
Average Service Time: | 1-5 days Replacement |