A+ Server 1113S-WN10RT

Starting at $1,692.99

Single AMD EPYC™ 7001/7002 Series Processor (AMD EPYC 7002 series drop-in support requires board revision 2.x)
2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required)
Expansion slots: 2 PCI-E 3.0 x16 (FH/HL) slots, 1 PCI-E 3.0 x16 (LP) slot M.2 Interface: PCI-E 3.0 x2 (NVMe based) M.2 Form Factor: 2280, 22110 M.2 Key: Onboard M-key Number of M.2: Dual
Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License key (SFT-OOB-LIC) included for OOB BIOS management
2x 10GBase-T LAN ports via Broadcom BCM57416
10 hot-swap 2.5″ U.2 NVMe drive bays, optional 4 SATA3 drive support with additional cables
750W Redundant Power Supplies Platinum Level (94%)

Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system.

Processor/Chipset

CPU	Single AMD EPYC™ 7001/7002* series Processor (Board revision 2.x required) Socket SP3 Supports CPU TDP 225W / cTDP up to 240W
Cores	Up to 32 Cores (Board revision 1.x + 7001 Processors) Up to 64 Cores (Board revision 2.x + 7002 Processors)
Chipset	System on Chip (SoC)


System Memory

Memory Capacity	16 DIMM slots Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) 8-channel memory bus
Memory Type	DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors)
DIMM Sizes	4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (* Board revision 2.x required + 7002 Processors)
Memory Voltage	1.2V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)


On-Board Devices

IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC
Network Controllers	Broadcom BCM57416 Controller
VGA	ASPEED AST2500 BMC


Expansion Slots

PCI Express	2 PCI-E 3.0 x16 (FH/HL) slots 1 PCI-E 3.0 x16 (LP) slot
M.2	Interface: PCI-E 3.0 x2 (NVMe based) Form Factor: 2280, 22110 Key: Onboard M-key Number of M.2: Dual


Input / Output

NVMe	Up to 10 U.2 NVMe support
SATA	Optional 4 SATA3 (6 Gbps) support via additional cables
LAN	2x 10GbBase-T LAN ports 1 RJ45 Dedicated IPMI LAN port
USB	7 USB 3.0 ports (4 rear + 2 front + 1 Type A)
VGA	1 VGA port
Others	1 COM port 2 SATA DOM power connectors TPM 1.2 header


System BIOS

BIOS Type	AMI 128Mb SPI Flash EEPROM
BIOS Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 5.1 USB Keyboard Support SMBIOS 3.1.1


Dimensions

Height	1.7″ (43mm)
Width	17.2″ (437mm)
Depth	23.5″ (597mm)
Weight	Net Weight: 20 lbs (9.1 kg) Gross Weight: 33 lbs (15.0 kg)


Front Panel

Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED


Backplane

Hybrid Backplane	Supports up to 10x 2.5″ NVMe storage devices, 4 of them SAS3/SATA3 compatible


System Cooling

Fans	6 heavy-duty PWM fans with optimal fan speed control
Air Shroud	1 Air Shroud


AC/DC240V Input Redundant Power Supply

700W/750W Redundant Power Supplies with PMBus
Total Output Power	700W/750W
Dimension (W x H x L)	54.5 x 40.25 x 320 mm
Input	100 – 140Vac / 8 – 6A / 50-60Hz 200 – 240Vac / 4.5 – 3.8A / 50-60Hz 200 – 240Vdc / 4.5 – 3.8A (CCC Only)
+12V	Max: 58A / Min: 0.5A (100 – 140Vac) Max: 62A / Min: 0.5A (200 – 240Vac) Max: 62A / Min: 0.5A (200 – 240Vdc) (CB/CCC Only)
+5V sb	Max: 3A / Min: 0A
Output Type	Gold Finger Connector Mating with Molex 45984-4343
Certification	Platinum Certified


PC Health Monitoring

CPU	Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT CPU switching voltage regulator
FAN	Up to 6-fan status tachometer monitoring Up to six 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU Thermal Trip Support Thermal control for 6x Fan connectors I²C Temperature Sensing Logic
LED	CPU / System Overheat LED
Other Features	Chassis Intrusion Detection Chassis Intrusion Header


Operating Environment / Compliance

RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 30°C (50°F to 86°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)

Weight	33 lbs
Dimensions	3.5 × 17.2 × 23.5 in
Form Factor	1U
Chipset	SoC (System on Chip)
CPU Family	AMD
CPU Type	AMD EPYC 7001/7002 Series
CPU Count	1 CPU Sockets
CPU Socket	SP3
TDP	225W / cTDP up to 240W
Drive Bays	10
Drive Factor	2.5"
MAX Memory	4TB
Memory DIMM	16
Network Controller	BCM57416
Network	2x 10GbE RJ45
Storage	NVMe (Optional), SAS (Optional), SATA (Native)
Redundant PWS	YES

Key Features

Single AMD EPYC™ 7001/7002 Series Processor (AMD EPYC 7002 series drop-in support requires board revision 2.x)
2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required)
Expansion slots: 2 PCI-E 3.0 x16 (FH/HL) slots, 1 PCI-E 3.0 x16 (LP) slot M.2 Interface: PCI-E 3.0 x2 (NVMe based) M.2 Form Factor: 2280, 22110 M.2 Key: Onboard M-key Number of M.2: Dual
Integrated IPMI 2.0 + KVM with dedicated LAN
• Software Out of Band License key (SFT-OOB-LIC) included for OOB BIOS management
2x 10GBase-T LAN ports via Broadcom BCM57416
10 hot-swap 2.5″ U.2 NVMe drive bays, optional 4 SATA3 drive support with additional cables
750W Redundant Power Supplies Platinum Level (94%)

Complete System Only: To maintain quality and integrity, this product is sold only as a completely-assembled system.

Warranty:	3 years Parts and labor Depot, 1 year parts advanced replacment
Provider:	Manufacturer
Phone No.:	510-652-8283
E-mail:	[email protected]
URL:	Click here for Manufacturer Website
Coverage:	Parts replacement or repair
Average Service Time:	1-5 days Replacement